Feel free to use these examples as a general template and customize to fit your own project.

SAMPLE—Painted Mural Construction/Installation Schedule
	Task/Item	Time Frames	
Day 1
	Litter Removal/ Tree Pruning/ Trim Landscape	8-9 Setup
9-4 Workhours
4-5 Breakdown	
Day 2-3
	Clean Prepare Wall Surface/ Prime Wall	7:30-8:00 Setup
8:00-3:00 Work Hours
3:00-3:30 Breakdown	
Day 4-6
	Block Out/Stenciled Design	8-9 Setup
9-4 Workhours
4-5 Breakdown	
Day 7-10
	Apply Mural 	7:30-8:00 Setup
8:00-3:00 Work Hours
3:00-3:30 Breakdown	
Day 8-10
	Let mural cure	8-9 Setup
9-4 Workhours
4-5 Breakdown	
Day 11
	Apply Anti-Graffiti Sealant	7:30-8:00 Setup
8:00-3:00 Work Hours
3:00-3:30 Breakdown	
Day 12
	Restore Site	8-9 Setup
9-4 Workhours
4-5 Breakdown	

SAMPLE--Tile Staircase Installation/Construction Schedule
Day 1	Clean Prep Area/ Litter Removal/ Equipment Staging	8AM-5PM
	
Day 2	Landscape Maintenance	8AM-5PM
	
Day 3	Structural Upgrades/ Concrete Set and Pour	8AM-5PM
	
Day 4	Structural Upgrades/ Concrete Cure	8AM-5PM
	
Day 5	Clean/ Prepare Riser Surface/ Apply Primer	8AM-5PM
	
Day 6	Apply Tile	8AM-5PM
	
Day 7	Apply Tile	8AM-5PM
	
Day 8	Apply Grout/Seal	8AM-5PM
	
Day 9	Tile setting	8AM-5PM
	
Day 10	Restore Site	8AM-5PM

SAMPLE--Commemorative Plaque Installation/Construction Plan
(1 Day – 1 Plaque)
8AM	Arrival/set up/ site prep	
9AM	Excavation of site	
12AM	Placement and installation of plaque	
2PM	Restoration of sidewalk	
4PM	Site cleanup/ removal of debris	

(If multiple single sites are installed over several days provide list of sites.)

(Group Installation)
Day 1	Prepare/ Excavate XXX Sites	9AM-10AM Setup
10AM-2PM Workday
2PM-3PM Cleanup	
Day 2	Place and Install XXX Sites	9AM-10AM Setup
10AM-2PM Workday
2PM-3PM Cleanup	
Day 3	Restore XXX Sites	9AM-10AM Setup
10AM-2PM Workday
2PM-3PM Cleanup	

SAMPLE--Minor Landscape Infrastructure Installation
Day 1	Site preparation/ staging	7AM-3PM	
Day 2	Landscape maintenance	7AM-3PM
	
Day 3	Preparation for installation of landscape infrastructure (lining, digging, leveling foundation)	7AM-3PM	
Day 4	Installation of infrastructure (laying edging, connections, placing gravel, etc.)	7AM-3PM	
Day 5	utility connection	7AM-3PM
	
Day 6	Restoration of site/ equipment removal	7AM-3PM	

SAMPLE--Neighborhood String Lights
Day 1	Trim Trees by certified arborist

 Prepare ABC St. block (east)	3PM-6PM	
Day 2	Hang lights on block ABC St. (east).  Contractor is XYZ.	3PM-6PM	
Day 3	Install electrical connection at ABC address by contractor XYZ	3PM-6PM	
Day 4	Trim Trees by certified arborist.

Prepare ABC St. block (west)	3PM-6PM	
Day 5	Hang Light on block ABC  St. (west).  Contractor is XYZ	3PM-6PM	
Day 6	Install electrical connection at ABC  address by contractor XYZ.	3PM-6PM	
Day 7 	Test System	3PM-6PM	
Day 8	Required Inspection (DBI)	10AM-2PM